Views: 0 Author: Site Editor Publish Time: 2026-09-10 Origin: Site
Metal dry cleaning hangers are a core consumable for dry cleaning businesses, commercial laundries, hotels, and uniform rental companies. These hangers must support garments during cleaning, pressing, transport, and storage. Unlike retail hangers, metal dry cleaning hangers are often used in high-volume cycles where bending, corrosion, and hook failure can disrupt operations. Sourcing from a metal dry cleaning hangers manufacturer therefore requires an understanding of raw materials, production processes, and quality standards.
HEBEI SHENGSEN TRADE CO., LTD works with metal dry cleaning hanger manufacturing partners in China to supply bulk buyers with consistent products. This article explains the manufacturing process, material specifications, cost factors, and supplier verification steps for metal dry cleaning hangers.
Metal dry cleaning hangers are produced in several forms. Each form is designed for a specific garment type and processing method.
Caped hangers have a paper or plastic cap that covers the hook and upper wire. The cap protects garments from rust marks and provides a surface for branding. Caped hangers are common in dry cleaning returns because they present a clean appearance.
Shirt hangers are the most common metal dry cleaning hanger. They are typically 16 inches to 17 inches wide and made from 14.5 gauge to 13 gauge wire. They are used for shirts, blouses, and light jackets.
Suit hangers have a wider shoulder and sometimes a trouser bar. They are used for suits, blazers, and coats. Heavy duty suit hangers may use 13 gauge or 12.5 gauge wire.
Strut hangers have a central support bar that adds rigidity. They are used for heavier garments and industrial laundry applications. The strut helps prevent the hanger from bending under load.
Tubular hangers are made from metal tubing rather than wire. They have a larger diameter and a different appearance. They are less common in dry cleaning but may be used in retail and hotel settings.
The production of metal dry cleaning hangers involves several stages. Understanding these stages helps buyers evaluate quality and cost.
Steel wire is drawn to the required diameter. Common diameters are 1.8 mm, 2.0 mm, 2.3 mm, and 2.5 mm. The wire may be low-carbon steel or high-carbon steel depending on strength requirements. Low-carbon steel is easier to form and weld. High-carbon steel offers higher tensile strength but may be less ductile.
The wire is cut to length and straightened. Automated machines can process thousands of pieces per hour. Dimensional accuracy at this stage affects the final shape of the hanger.
The wire is bent into the hanger shape using mechanical presses or CNC bending machines. The shoulder curve, hook, and lower bar are formed. For strut hangers, an additional support bar is welded or attached.
The joints are welded using resistance welding or spot welding. Weld strength is important because the hook and shoulder joints carry the load. A weak weld can cause the hanger to fail under weight.
The hanger is cleaned and then coated. Common treatments include:
Galvanizing: zinc coating for corrosion resistance.
Powder coating: epoxy or polyester powder for color and durability.
Paint dipping: liquid paint for low-cost color coverage.
Electrophoretic coating: uniform coating for complex shapes.
Caps, clips, trouser bars, or non-slip tubes are added. Caped hangers receive a paper or plastic cap. Some hangers receive a logo print or label.
Finished hangers are inspected for dimensions, weld strength, coating adhesion, and appearance. They are then packed in cartons or poly bags.
The main raw material for metal dry cleaning hangers is steel wire. The following table shows typical specifications.
Parameter | Common Range | Notes |
|---|---|---|
Wire diameter | 1.8 mm to 2.5 mm | Thicker wire increases load capacity |
Wire gauge | 14.5 to 12.5 | Lower gauge means thicker wire |
Steel type | Low carbon or high carbon | Low carbon is easier to weld |
Tensile strength | 350 MPa to 800 MPa | Depends on steel grade |
Zinc coating | 10 g/m² to 30 g/m² | Higher coating improves corrosion resistance |
Powder coating thickness | 60 μm to 120 μm | Affects durability and appearance |
Buyers should request material certificates or test reports for large orders. The steel wire grade affects load capacity, bending resistance, and corrosion performance.
Surface treatment is a major cost factor and a key quality parameter. Dry cleaning chemicals and moisture can cause unprotected steel to rust. The following options are common:
Galvanized wire has a zinc coating that protects the steel. It is suitable for dry cleaning because it resists moisture and chemicals. The zinc coating weight determines the level of protection. A coating of 20 g/m² to 30 g/m² is typical for commercial hangers.
Powder coating provides a colored, durable finish. It is applied electrostatically and cured in an oven. Powder-coated hangers are common in retail and hotel applications. The coating thickness is typically 60 μm to 120 μm.
Paint dipping is a lower-cost option. The hanger is dipped into liquid paint and dried. The coating may be less uniform than powder coating, but it provides color and some corrosion resistance.
Electrophoretic coating uses an electric current to deposit paint on the metal. It provides a uniform coating on complex shapes and is often used for higher-end hangers.
A metal dry cleaning hangers manufacturer should have a documented quality control process. The following tests are common:
Load test: Apply a static load of 5 kg for 24 hours. The hanger should not deform permanently.
Weld strength test: Apply force to the welded joint. The weld should not break.
Salt spray test: Expose the hanger to salt spray for 24 to 48 hours. Check for rust.
Coating adhesion test: Cross-hatch the coating and apply tape. Check for peeling.
Dimensional inspection: Measure shoulder width, hook height, wire diameter, and angle.
Hook rotation test: Rotate the hook 360 degrees. Check for smooth movement and no cracking.
International standards such as ISO 9001 are relevant for quality management systems. Some buyers also request ASTM or EN standards for wire and coating performance. HEBEI SHENGSEN TRADE CO., LTD coordinates with manufacturing partners to provide inspection reports and sample approvals.
Production capacity depends on the factory size and automation level. A mid-sized metal hanger factory may produce 500,000 to 2,000,000 pieces per month. A large factory may produce more than 5,000,000 pieces per month.
Typical lead times for bulk orders are:
Sample production: 5 to 10 days.
Mass production after sample approval: 20 to 35 days.
Custom packaging: add 5 to 10 days.
Shipping by sea: 20 to 40 days depending on destination.
Buyers should plan inventory to cover lead time and transit time. For repeat orders, a buffer of 15% to 20% of monthly consumption is common.
The price of metal dry cleaning hangers is influenced by several factors:
Raw material cost: Steel wire prices fluctuate with global steel markets.
Wire diameter: Thicker wire increases material cost.
Surface treatment: Galvanizing and powder coating add cost.
Accessories: Caps, clips, and trouser bars increase cost.
Packaging: Individual poly bags and printed cartons add cost.
Order quantity: Larger orders reduce per-piece cost.
Labor and energy: Factory location and automation level affect cost.
Freight: Shipping method and distance affect delivered cost.
As a general reference, basic metal wire hangers may be priced from USD 0.03 to USD 0.08 per piece for large orders. Heavy duty hangers with galvanized finish and caps may be priced from USD 0.08 to USD 0.15 per piece. Custom logo printing may add USD 0.01 to USD 0.03 per piece.
China is a major source for metal dry cleaning hangers because of its steel wire supply, manufacturing infrastructure, and export logistics. Buyers sourcing from China should consider:
MOQ: Confirm minimum order quantity for standard and custom products.
Payment terms: Common terms are 30% deposit and 70% balance against copy of B/L.
Incoterms: FOB, CIF, and EXW are common. FOB is often preferred for bulk shipments.
Quality inspection: Arrange third-party inspection before shipment.
Compliance: Check import regulations and tariffs for the destination country.
Communication: Confirm specifications in writing and approve samples.
HEBEI SHENGSEN TRADE CO., LTD supports buyers with export documentation, logistics coordination, and quality control follow-up. The company works with manufacturing partners that produce metal wire hangers in various specifications.
Customization helps dry cleaning businesses and hotels present a consistent brand. Common options include:
Logo printing on the hanger body or cap.
Custom cap colors and printed caps.
Custom wire colors through powder coating.
Non-slip tubes for suit hangers.
Trouser bars and clips.
Individual poly bags with printed logos.
Buyers should request a pre-production sample for any custom feature. The sample approval process reduces the risk of mass production errors.
Packaging affects shipping cost and product protection. Common packaging methods for metal hangers include:
Bulk cartons with 100 to 500 pieces.
Poly bags with 10 to 50 pieces.
Custom printed cartons for retail.
Palletized cartons for large orders.
A 20-foot container can hold approximately 100,000 to 150,000 metal wire hangers. A 40-foot high cube container can hold approximately 200,000 to 300,000 pieces. The exact quantity depends on hanger size, packaging, and whether caps or accessories are included.
Buyers should calculate the total delivered cost, including freight, insurance, duties, and port charges. A lower unit price may not result in a lower delivered cost if packaging is inefficient.
Before placing a bulk order, buyers should verify the supplier. A practical verification process includes:
Request business license and export records.
Ask for product test reports.
Request samples and compare with specifications.
Arrange a factory audit or third-party inspection.
Check references from existing buyers.
Confirm production capacity and lead time.
Review payment terms and contract details.
Confirm packaging and labeling requirements.
A supplier that provides clear documentation and allows inspection is more likely to meet order requirements.
HEBEI SHENGSEN TRADE CO., LTD supplies metal dry cleaning hangers to bulk buyers. The company works with manufacturing partners in China and provides support for specification development, sampling, quality control, and export logistics. Product options include caped hangers, shirt hangers, suit hangers, strut hangers, and tubular hangers.
The company serves dry cleaning chains, hotels, uniform rental companies, and wholesale distributors. Buyers can request quotes based on wire gauge, length, finish, cap type, packaging, and order quantity. HEBEI SHENGSEN TRADE CO., LTD focuses on consistent specifications and clear communication throughout the order process.
Sourcing metal dry cleaning hangers from a manufacturer requires attention to wire gauge, steel grade, surface treatment, weld strength, and packaging. Buyers should define technical requirements, request samples, and verify quality control. Bulk pricing depends on material, finish, accessories, order quantity, and freight.
HEBEI SHENGSEN TRADE CO., LTD provides metal dry cleaning hangers for wholesale and bulk buyers. For a detailed quotation, buyers should provide target specifications, estimated annual volume, destination port, and any customization requirements. A structured sourcing process helps ensure a stable supply of hangers that meet commercial dry cleaning demands.