Views: 0 Author: Site Editor Publish Time: 2026-11-07 Origin: Site
For importers sourcing laundry hangers from China, the packing quantity per carton is a freight variable that directly shapes unit landed cost. The 500 per carton hangers standard across the laundry wire hanger range balances handling weight, carton strength and container fill, and has become the default for dry cleaning supply. Buyers who understand how this quantity is built, and how it interacts with container planning, can compare quotes accurately and avoid paying for air.
The supplier packs its 16 inch and 18 inch laundry wire hangers at 500 pieces per carton, alongside other products that use different quantities. The packing matrix — 500 for wire hangers, 250 for drapery hangers, 2500 for paper trouser guards — exists because each product has a different volume. Knowing where 500 per carton hangers sit in that matrix, and how to verify packing before payment, is the core of a clean import order.
The laundry wire hanger is a flat, low-volume product: a 16 inch or 18 inch frame of iron wire at 1.9mm-2.6mm takes little space per piece, but the cumulative weight of 500 steel hangers fills a carton to a weight one person can move. The standard emerged from that balance — enough units to make a carton worth handling, few enough that it stays manageable on a conveyor line or in a delivery van.
Across the laundry wire hanger range, 500 pieces per carton applies uniformly to 16 inch and 18 inch sizes, whether galvanized, powder coated or PVC coated. This consistency means a buyer ordering mixed types can stack cartons uniformly and calculate freight on a per-carton basis. The standard works for the product — understanding that helps a buyer judge whether it fits their own handling setup.
The catalogue uses several pack quantities, each matched to a product's physical characteristics. Laundry wire hangers at 16 inch and 18 inch ship 500 per carton. Drapery hangers, longer and bulkier at 18 inch with a paper tube, ship 250 per carton — half the quantity because each piece occupies more volume. Paper shoulder guards, thin and flat, ship 500 per carton; paper trouser guards pack 2500 per carton due to their compact form.
The strut hanger category splits packing: laundry strut hangers ship 250 per carton, accessories 500. This split reflects the difference in bulk between the hanger and its components. A buyer ordering across the range should map each product to its pack quantity before calculating total carton count, because assuming a uniform 500 across everything will misstate freight volume — a common error on first orders.
Freight on 500 per carton hangers is calculated on either weight or volumetric measure, whichever is greater under the carrier's rules. A carton of 500 wire hangers in iron wire at 1.9mm-2.6mm carries real weight — the steel content is dense enough that weight often governs for sea freight. The buyer should confirm packed weight and external carton dimensions with the supplier before requesting a freight quote, because estimates based on product weight alone ignore carton, strapping and pallet weight.
For air freight or express, volumetric weight becomes more likely to govern, and the carton's external dimensions matter as much as its contents. The packing is designed for international shipping, with export-grade cartons that resist compression. A buyer should ask for the actual packed weight and carton dimensions, then feed those into the freight quote — never accept an estimate built on assumed dimensions, because a 10 percent error in carton volume translates into a 10 percent cost error.
A buyer ordering 500 per carton hangers needs to convert carton count into container fill to understand true unit landed cost. A standard container holds a fixed number of cartons based on stacked dimensions — and because wire hanger cartons are dense and stackable, they fill a container efficiently. Multiply cartons by 500 to get total pieces, then divide total freight and duty by that piece count for the per-unit logistics cost.
The mistake buyers make is comparing unit prices across suppliers without normalising for carton count and container fill. A supplier offering a lower piece price but packing fewer units per carton can cost more landed, because freight per piece rises. The 500 per carton standard gives a consistent basis for comparison. Always ask for packed carton dimensions and weight, model the container fill, and calculate landed cost per hanger before choosing.
The packing matrix exists because one quantity cannot serve every product. Drapery hangers at 250 per carton reflect the longer 18 inch paper-tube construction, bulkier per piece. Paper trouser guards at 2500 work because the product is a thin paper strip that packs flat — 2500 pieces fit in a carton smaller than 500 wire hangers. Paper shoulder guards at 500 match the wire hanger quantity because they are ordered alongside hangers for shoulder protection during storage and transport.
Laundry strut hangers at 250, with accessories at 500, create a paired system. A buyer ordering both should calculate the carton ratio to ensure the total order arrives in balanced proportion. Understanding these alternative quantities helps a buyer plan mixed-product orders and recognise when a non-standard pack quantity signals a different product rather than a packing error.
A carton of 500 wire hangers undergoes stacking, compression and handling between the factory and the buyer's warehouse. The export packaging is built for international shipping: the carton board resists vertical compression when stacked on a pallet, and the internal arrangement keeps hangers from shifting and scratching each other. For powder coated and PVC coated hangers, surface protection matters — coating damage in transit defeats the purpose of ordering coated product.
Buyers should specify export packaging in the purchase order and confirm cartons are strapped and palletised where required. Strut hangers, with their paper tube construction, are more vulnerable to crushing than all-wire hangers, and the 250 per carton quantity partly reflects that. A buyer receiving cartons should inspect for crushing before accepting, because compressed cartons signal damage not visible until opened.
Import cartons need markings that serve customs, the freight forwarder and the buyer's warehouse. Standard markings include product name, quantity (500 pcs), carton number, gross and net weight, and origin. A buyer importing into Europe or the Middle East should confirm required markings with their customs broker, because missing markings can delay clearance and add handling charges.
For buyers who re-sell to dry cleaning chains, barcode labelling speeds warehouse receiving. The supplier offers logo printing and custom packaging printing, extending to carton marking. Specify the label format, barcode type and placement in the purchase order, and request a marking proof before production. This matters for mixed shipments — when a container carries 500 per carton hangers alongside 250 per carton drapery hangers, clear markings prevent misrouting.
The cartons used for 500 per carton hangers are built to survive international shipping, making them sturdy enough for reuse. Distributors who break bulk for resale can reuse the original cartons for smaller deliveries to individual stores, or repack into smaller quantities. The carton's construction — thick board, strapped — supports this secondary use, reducing packaging waste.
For buyers selling hangers in smaller quantities, repacking from a 500-piece carton into 50 or 100 unit packs is common, with the original carton as the master pack. Plan repacking at the order stage: request cartons that open cleanly and dividers that keep hangers organised for counting. Paper shoulder guards at 500 and paper trouser guards at 2500 follow the same logic, the larger quantity serving as a master pack for retail units.
A buyer stocking multiple products needs to plan inventory around the different pack quantities. Wire hangers at 500, drapery hangers at 250, strut hangers at 250, shoulder guards at 500 and trouser guards at 2500 each represent a different unit of stock. Ordering one carton of each does not produce balanced inventory — a buyer needs one carton of trouser guards for every five cartons of shoulder guards to reach comparable piece counts.
The practical approach is to plan by piece count, then convert to cartons using the packing matrix. A chain needing 10,000 wire hangers, 2,000 shoulder guards and 5,000 trouser guards would order 20 cartons of hangers, 4 of shoulder guards and 2 of trouser guards. This prevents overstocking one product while understocking another. The supplier quotes within 24 hours, so a buyer can confirm the carton breakdown before committing.
Before confirming an order for 500 per carton hangers, a buyer should verify: product name and size (16 inch or 18 inch), wire diameter or coating type, pack quantity per carton, total carton count, packed weight per carton, external carton dimensions, carton markings and labels, delivery terms (FOB, CFR, CIF, EXW, FCA or express), and payment terms. Each item appears in the supplier's quotation or can be confirmed before production.
The pre-production sample and final inspection are the two quality checkpoints. A buyer should request confirmation of packing details at the sample stage — not just the hanger, but the carton it ships in. Accepted payment terms include T/T with 30 percent deposit and 70 percent against B/L scan, L/C, Western Union, cash and escrow. Confirming packing in writing before the deposit prevents disputes at final inspection, when changing packing is no longer practical.
The 500 per carton hangers standard balances handling weight, carton strength and unit count. A carton of 500 iron wire hangers at 1.9mm-2.6mm is heavy enough to be efficient but still movable by one person. The quantity applies uniformly to 16 inch and 18 inch sizes, whether galvanized, powder coated or PVC coated, making freight and inventory calculations consistent across the range.
Drapery hangers ship 250 per carton due to their longer 18 inch paper-tube construction. Laundry strut hangers ship 250 per carton with accessories at 500. Paper shoulder guards ship 500 per carton, and paper trouser guards ship 2500 per carton. Each quantity reflects the product's volume and handling needs, not an arbitrary choice.
Confirm the packed carton weight and external dimensions with the supplier, then ask your freight forwarder for a quote based on those figures. Multiply cartons by 500 to get total pieces, then divide total freight and duty by that piece count. Always use actual packed dimensions rather than estimates, because carton volume errors translate directly into freight cost errors.
Yes, the export-grade cartons used for international shipping are sturdy enough for secondary use. Distributors who break bulk for resale to individual dry cleaning stores can reuse the original cartons or repack from the 500-piece master into smaller quantities. If repacking is planned, request cartons that open cleanly and specify internal arrangement at the order stage.
Verify product size, wire diameter, pack quantity, total carton count, packed weight, external carton dimensions, carton markings, delivery terms and payment terms before the deposit. Request a pre-production sample that includes the carton, not just the hanger. Confirm everything in writing before paying the T/T deposit, because changing packing specifications after production starts is impractical. HEBEI SHENGSEN TRADE CO.,LTD. holds 500 pieces per carton as the standard across its 16 inch and 18 inch laundry wire hanger range, and has exported from Shijiazhuang, Hebei Province since 2008.